Miele W 4800 Issue Possible cause Fix, Fault indicator, Drain lights, Intake lights, Status

Frequently asked questions

The program was canceled, the buzzer sounds and the "Start" button flashes.

Issue	Possible cause	Fix
		– To turn off the fault message:
		Open the drum door or press
		and hold the "Pause/Hold to
		Cancel" button until the fault
		message goes out.
The "FAULT" indicator	– The drain is	– Clean the drain filter and the
"Drain" lights.	blocked.	drain pump.
	– The drain hose is	– The maximum drain pump
	too high.	height is 3 ft (1 m).
The "FAULT" indicator	The water intake is	Possible fault:
"Intake" lights.	blocked.	– Check if the water supply is
		open all the way.
		– the inlet hose is kinked.
The "FAULT"	The waterproof	Call Technical Service.
indicators "Intake"	system has
and "Drain" light.	activated.
The "STATUS"	There is a fault.	Start the program once more.
indicators "Pre-Wash"		If the fault message appears
and "Main Wash"		again call Technical Service.
light.

28