Tape Operations
Notes:
•If the FILP DOWN PANEL does not open fully, gen- tly open with your hand.
•The radio mode is selected automatically 4 seconds after Eject button & is pressed.
If the auto antenna terminal for this unit is connected, the antenna is extended automatically. If you are in
a location where the antenna may strike something, press FNC button 3 to switch the mode.
Switching to the other side of the tape
Press PROG button @ to change tape direction and playback.
∗The tape mechanism automatically reverses di- rection and engage playback at the end of the tape (auto reverse).
Fast-forwarding/rewinding
●
Press the right side of SEARCH button $.
●REW(rewind):
Press the left side of SEARCH button $.
●Canceling FF/REW: Press Play/pause button 2.
∗When the end of the tape is reached with FF/REW, the mechanism automatically reverses tape direc- tion and resumes playback.
∗If you select another mode during FF/REW, it is selected with FF/REW continued.
The mechanism automatically makes FF/REW stop when the end of the tape is reached.
This function is called “monitor mode”.
APC (Auto Program Control) function
The APC function allows the tape to skip forward to the beginning of the next track or rewind to the start of the current track.
●Skipping forward to the next track (“APC- FF”)
During tape playback, press the right side of SEARCH button $ twice to
●Skipping backwards to the start of the cur- rent track
During tape playback, press the left side of SEARCH button $ twice to rewind to the start of the current track. The current track plays from the beginning.
●Canceling FF/REW APC to resume playback Press Play/pause button 2.
∗If you select another mode during APC mode, it is selected with APC mode continued.
The mechanism automatically makes APC mode stop when it finds the next track (in
Dolby noise reduction system
The Dolby noise reduction system increases the volume level of high frequency sounds during recording and sets it back to their original level during play. This system reduces hissing noise which is typical of cassette tapes.
∗Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. Dolby and the
1.Press DOLBY NR button 7 to select Dolby noise reduction. Each time you press DOLBY NR button 7, the Dolby type changes in the following order:
DOLBY B NR ON➜DOLBY C NR ON➜DOLBY NR OFF➜DOLBY B NR ON....
2.When DOLBY B NR ON is selected, “DOLBY B NR” appears in the display. On the contrary, when DOLBY C NR ON is selected, “DOLBY C NR” appears in the display.
Intro tape scan
The intro tape scan allows the first 10 seconds of all the tracks on the tape to be played.
This function continues automatically until it is canceled.
1.Press SCN button 5 to start the intro tape scan. “SCN” lights in the display.
2.To cancel the intro tape scan, press SCN but- ton 5 again. “SCN” goes off from the display and the current track continues to play.
∗When the end of the tape is reached during the intro tape scan, the tape mechanism automatically reverses direction and continues the intro tape scan.
∗If you select another mode during the intro tape scan, the mechanism automatically makes the intro tape scan stop when it finds the next track (APC function).
ARX8570z 15
