Other Handy Functions
Entering titles
Titles up to 10 characters long can be stored in memory and displayed for radio stations and CDs. The numbers of titles that can be entered for each mode are as follows.
Mode | Number of titles |
Radio mode | 30 titles |
TV mode | 15 titles |
|
|
CD changer mode | Number of titles |
CDC655z connected | 60 titles |
CDC655Tz connected | 100 titles |
CDC1255z connected | 50 titles |
1.Press FNC button 3to select the mode you want to enter a title (radio, CD changer or TV).
∗ Titles cannot be entered for MDs with this unit.
2.Select and play a CD in a CD changer or tune to an appropriate TV or radio station.
3.Press DISP button 0 and display the sub- title.
4.Press TITLE button 4. “TITL” appears in the display and the cursor position flashes.
5.Press the right or left side of SEARCH button $ to move the cursor.
6.Press DISP button 0 to select a character. Each time you press DISP button 0, the char- acter changes in the following order:
Capital letters ➜ Small letters ➜ Numbers ➜ Symbols ➜ Umlaut ➜ Capital letters...
7.Turn the Rotary knob % to select the desired character. Turning the Rotary knob % clock- wise moves the cursor to the next character; turning it counterclockwise moves the cursor to the previous character.
8.Repeat steps 5 to 7 to enter up to 10 charac- ters for the title.
9.Press and hold ENT button 2 for 2 seconds or longer to store the title into memory and cancel title input mode.
Clearing titles
1.Play a CD in a CD changer or tune a radio station or TV station that you want to clear the title for.
2.Press DISP button 0 and display the sub- title.
3.Press TITLE button 4. “TITL” appears in the display and the display switches to the title input display.
4.Press BND button @.
5.Press and hold ENT button 2 for 2 seconds or longer to clear the title and cancel the title input mode.
Adjusting the display contrast
You can adjust the display contrast according to the angle of installation of the unit.
∗The factory default setting is “6”. (Adjustment level: 1 to 11)
1.Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display.
2.Press the right or left side of SEARCH button $ to select “CONTRAST”.
3.Press ENT button 2.
4.Turn the Rotary knob % clockwise or coun- terclockwise to adjust the contrast.
5.Pressing ENT button 2 returns to the adjust- ment selection display.
6.Press ADJ button 4 to return to the previous mode.
Setting the SEARCH button illumi- nation color (Prism function)
The change in the SEARCH button illumination color according to the unit operating state is called the “Prism function”. You can set the illu- mination pattern you prefer.
∗The factory default setting is “PATTERN 1”.
1.Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display.
2.Press the right or left side of SEARCH button $ to select “PRISM KEY”.
3.Press ENT button 2.
4.Turn the Rotary knob % clockwise or coun- terclockwise to set the illumination pattern. Each time you turn the Rotary knob %, the illumination pattern changes in the following order:
PATTERN 1 ➜ PATTERN 2 ➜ OFF ➜ PAT- TERN 1...
PATTERN 1:
The color changes for each function mode, station tuning, scanning, and other operations.
PATTERN 2:
In addition to the changes in Pattern 1, the color changes according to the audio level.
OFF:
The color changes according to the function mode.
ARX8570z 17
