Remote Control, Precautions, Flip Down Panel

6. REMOTE CONTROL

1. FEATURES

Handling Cassette Tapes

Receiver for remote control unit

OPEN

ARX8570z

ISR	1	2	3	4	5	6

	Operating range: 30°in all directions
Remote control unit	Signal transmitter

■ Rotary Encoder Volume Control with Multi-Color Prism Key

■ Touch-n-Go Flip Down Detachable Face

■ Controller for Optional DSP/EQ & TV Tuner Modules

■ Capability to Read CD TEXT Data from Clarion Compatible CD Changer

■ Z-Enhancer with 3 Adjustment Modes

■ CeNET with Balanced Audio Line Transmission and Dynamic Noise Canceling

■	® FM Reception System

■Full Logic Tape Transport with True Function / Auto Reverse with Dual Azimuth Adjust

■Dolby ® B/C Noise Reduction

■4V/4-Channel RCA Line Level Output with Fader Control

■4V/2-Channel Non-Fade RCA Line Level Output with Volume Control

■180W (45W×4) Maximum Power Output

2.PRECAUTIONS

Using any of the following types of cassette tapes can cause malfunctions.

•Cassette tapes with low recording levels

•Cassette tapes in which the unrecorded sec- tion between tracks is shorter than 4 seconds

•Cassette tapes with noise or the like recorded between tracks

•Cassette tapes on which there are long unre- corded sections in the middle of a track

Handling precautions

•Slack in the tape can cause malfunctions. In particular for prerecorded cassette tapes and 90-minute tapes, take up any slack in the tape before inserting it into the cassette player.

•Avoid using cassettes of 120 minutes or longer. (Such cassettes have extremely thin tape, so the tape can become stretched or cut.)

•Periodically play a cleaning cassette in the player to clean the head.

•Keep magnet items like magnets, and iron and steel items like screwdrivers away from both cassette tapes and the tape head in the player.

•Do not oil the cassette mechanism.

•Do not use any cassette tapes with peeling labels or deformed cases. Such cassette tapes can cause breakdowns.

•When not using the player, always take the cassette out of the mechanism. Exposing a cassette to direct sunlight, extreme tempera- tures or high humidity can damage the cas- sette.

1. When the auto antenna cord is connected	2. This unit uses a precision mechanism. Even
to the car auto antenna cord, when the unit	in the event that trouble arises, never open
is switched to the radio mode (or the TV	the case, disassemble the unit, or lubricate
mode), the antenna is extended automati-	the rotating parts.
cally. If the car is in a narrow space, the an-
tenna may strike something, so be careful.

Flip Down Panel

The ARX8570z uses a flip-down structure that makes possible large-size displays.

Inserting the Batteries

This equipment generates, uses, and can radi- ate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio com- munications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interfer- ence to radio or television reception, which can

CAUTION

CHANGES OR MODIFICATIONS NOT EX- PRESSLY APPROVED BY THE MANUFAC- TURER FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

INFORMATION FOR USERS:.

CAUTION

When opening and closing the FLIP DOWN PANEL, be careful not to catch your fingers. They could be injured.

1. Always use the ARX8570z with the FLIP

DOWN PANEL closed.

3.	Do not use the FLIP DOWN PANEL as a tray
	to place objects on when it is open.
4.	When closing the FLIP DOWN PANEL, do not
	press the OPEN button 1.
5.	Strong impacts to the operating or display
	section can cause damage or deformation.
6.	If the FLIP DOWN PANEL does not open fully,

1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow.

2.Insert the AA (UM-3/1.5V) batteries that came with the remote control unit facing in the directions shown in the figure, then close the rear cover.

Notes:

Using batteries improperly can cause them to ex- plode. Take note of the following points:

¥When replacing batteries, replace both batteries

with new ones.	Rear side

AA (UM-3/1.5V) Batteries

Rear cover

be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV technician for help.

CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANU- FACTURER WILL VOID THE WARRANTY AND WILL VIOLATE FCC APPROVAL.

2. Do not force operations or use this device

abnormally when opening or closing the FLIP

DOWN PANEL.

gently open it with your hand.

¥Do not short-circuit, disassemble or heat batteries.

¥Do not dispose of batteries into fire or water.

¥Dispose of spent batteries properly.

Be sure to unfold and read the next page. Veuillez déplier et vous référer à la page suivante.

Cerciórese de desplegar y de leer la página siguiente.