Tape Operations

Radio Operations

Auto store

Auto store is a function for storing up to 6 sta- tions that are automatically tuned in sequentially. If 6 stations cannot be received, a previously stored station remains unoverwritten at the memory position.

1.Press BND button @ and select the desired band (FM or AM).

2.Press and hold AS button 5 for 2 seconds or longer. The stations with good reception are stored automatically to the Preset buttons 9.

Preset scan

Preset scan receives the stations stored in pre- set memory in order. This function is useful when searching for a desired station in memory.

1.Press PS button 5.

2.When a desired station is tuned in, press PS button 5again to continue receiving that sta- tion.

Note:

•Be careful not to press and hold PS button 5 for 2 seconds or longer, otherwise the auto store func- tion engages and the unit starts storing stations.

Instant station recall (ISR)

Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. The ISR function even oper- ates with the unit in other modes.

●ISR memory

1.Select the station that you wish to store in ISR memory.

2.Press and hold ISR button ! for 2 seconds

or longer.

●Recalling a station with ISR

In any mode, press ISR button ! to turn on the radio function and tune the selected radio sta- tion. “ISR” appears in the display. Press ISR but- ton ! again to return to the previous mode.

Loading a tape

1.Press OPEN button 1 to access the cassette tape insertion slot behind the FLIP DOWN PANEL.

2.Load a tape into the cassette tape insertion slot. “LOADING” appears in the display and

starts playing.

∗When a metal or chrome bias (70μ sec) tape is inserted, the metal tape setting is selected auto- matically.

3. Close the FLIP DOWN PANEL.

CAUTION .

Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL.

Notes:

•If the FILP DOWN PANEL does not open fully, gen- tly open with your hand.

•Do not leave the FLIP DOWN PANEL open. Be sure to close it to avoid any possible mechanical damage.

•Do not put your hands, fingers or foreign objects into the cassette tape insertion slot.

•When a tape has already been loaded in the cas- sette tape insertion slot, another one cannot be inserted into it. Never try to insert another tape forcibly.

Listening to a tape already inserted

Press FNC button 3 to select the tape mode. The tape starts playing automatically. If no tape is loaded in the unit, “NO CASSETTE” appears in the display.

Pausing tape play

1.Press Play/pause button 2 to pause tape playback. “PAUSE” appears in the display.

2.Press Play/pause button 2 again to resume tape playback.

Ejecting a tape

1.Press OPEN button 1to access the cassette Eject button & behind the FLIP DOWN PANEL.

2.Press Eject button & to eject a tape and take it out.

3.Close the FLIP DOWN PANEL.

CAUTION