Siemens Sitrans Transmitter Variables Dynamic Value menu level, Rotary, Left, Switch, Mode, Arrow

1.Set the rotary switch to 1. The LCD displays Pv = 0, 1, or P.

2.Press the RED (+) or BLUE (–) button to select a higher or lower value.

3.Press both buttons to select Pv = P.

Notes:

•When PV is set to 1, settings cannot be changed using push-button adjustment.

•Many settings cannot be changed using push-button calibration when PV = P.

If PV = 0, TV0 is selected for PV, URV, LRV, USL, LSL, Damping, and Highest/Lowest recorded value. The units are implicitly1 pF.

If PV = 1, TV1 is selected for PV, URV, LRV, USL, LSL, Damping, and Highest/Lowest recorded value. The units are user definable but only by HART.

If PV = P, TV0 is selected: however, the values for PV and URV are displayed in %; LRV, USL, LSL, are blanked out with - - - -; all other fields are identical to that of TV0.

Transmitter Variables Dynamic Value: menu level 1

This menu selection allows you to read the values of the dynamic variables TV0, TV1, TV22, and TV3. When no buttons are pressed, the LCD displays the dynamic value for TV0.

Menu	Rotary	Left
	Switch		Mode		Description	Action	Values
Item	Position	Arrow
					Transmitter		Dynamic
			TV0	*	Variables	No buttons pressed	value for
					Dynamic Value		TV0
					Transmitter	Press and hold RED	Dynamic
			TV1		Variables		value for
					Dynamic Value	(+) button	TV1
1C	C	On	TV22		Transmitter	Press and hold	Dynamic
					Variables		value for
						BLUE(–) button
					Dynamic Value		TV2
			TV32		Transmitter	Both buttons	Dynamic
					Variables	pressed	value for
					Dynamic Value	simultaneously	TV3
			Invalid				Display
			selection				shows 0.00

Appendix A

1.The units are pF: there is no other option.

2.TV2 and TV3 are not currently used, but are available for future development.

7ML19985GE01 SITRANS LC 500 – INSTRUCTION MANUAL Page 61