How to access the data | Siemens Sitrans, LC 500 specs

How to access the data:

Access data in the transmitter from 28 menu items divided between two menu levels: 00 to 0F and 10 to 1F. Use the rotary switch and push-buttons in combination to select an item and adjust the value.

The functions of each menu item are illustrated in application examples on page 93 to 94. Details on using each menu item are given in Appendix A: Menu Groups on page 54. (See also Rotary Switch Positions – Quick Reference on page 41 showing the switch position and button press combinations used to carry out different functions.)

Menu Levels 00 to 0F and 10 to 1F

	Menu 00 to 0F	Description	Menu Group	Details
	09	Stepsize Update Value		page 55

	0A	Damping		page 56

	0B	Lower Sensor Limit	Transmitter	page 56

	0C	Upper Sensor Limit		page 57
	0C	Upper Sensor Limit	Variable Settings	page 57

	0D	Delta Range Setting		page 57
	0D	Delta Range Setting		page 57

	0E	Lower Range Value		page 58

	0F	Upper Range Value		page 59

	00	Dynamic Value (PV)	Transmitter	page 59
	02	Max./Min. Recorded Value	Transmitter	page 60
	02	Max./Min. Recorded Value	Variable Value	page 60
	01	Transmitter Variable select for PV	Variable Value	page 60
	01	Transmitter Variable select for PV		page 60
	03	Upper Threshold Delay: 2-state mode		page 62

	04	Lower Threshold Delay: 2-state mode	Analog Output	page 62

	05	Upper Threshold Setting: 2-state mode		page 63
	05	Upper Threshold Setting: 2-state mode	Signalling	page 63

	06	Lower Threshold Setting: 2-state mode		page 64
	06	Lower Threshold Setting: 2-state mode	(loop-current)	page 64
			(loop-current)
	07	Analog Signalling Mode		page 64

	08	Analog Fault Signalling		page 66

	Menu 10 to 1F	Description	Menu Group	Details
	10	Dynamic Value (PV)	Transmitter	page 59
	1C	Transmitter Variables Dynamic Value	Variable Values	page 61

	13	Upper Threshold Delay: solid-state output		page 67
	14	Lower Threshold Delay: solid-state output		page 68
	15	Upper Threshold Setting: solid-state output	Digital Output	page 68
	16	Lower Threshold Setting: solid-state output	Signalling	page 69
	17	Digital Signalling Mode		page 70
	18	Digital Fault Signalling		page 71
	11	Output Signal Processing Test		page 72
	12	Factory Settings	Miscellaneous	page 72

	19	Range Inversion		page 73
	19	Range Inversion		page 73

	1F	Keylock Level		page 73
	1A
	1B	Non-operational	Spare
	1D	Non-operational	Spare
	1D
	1E

User Interface

7ML19985GE01

SITRANS LC 500 – INSTRUCTION MANUAL

Page 37

Image 43

Siemens Sitrans, LC 500 How to access the data, Menu Levels 00 to 0F and 10 to 1F, Description Menu Group Details

Contents

Sitrans Technical data subject to change Safety Guidelines Qualified PersonnelTechnical Publications Table of Contents Maintenance Appendix C Hart Documentation Iii 113 Introduction Applications Safety marking symbols Safety NotesManual Description Abbreviations and IdentificationsShort form Long Form Performance PowerSpecifications Environmental User Interface OutputsCommunications Enclosure electronic WeightElectrodes Wetted Parts Approvals Process Conditions Capacitance measurement in a cylindrical metal tank Sitrans LC 500 TransmitterOperating Principles Operation & Application Non-conductive or conductive contents A non-conductive or irregular tank Sitrans LC 500 electrodeStilling well Inactive Active shieldActive Measurement Section Probe seal Application Sitrans LC USL Level Measurement Interface Measurement Switch action Via the solid-state output Fault SignallingVia the loop current Via Hart Probe Configuration Sitrans LC 500 Probe Configuration Process Connections Electrode AssemblySeal Types Pressure and Temperature Considerations Non-standard applications Non-Standard Application Sitrans LC 500 Configuration Installation Sitrans LC 500 InstallationHandling Electrodes Mounting Instructions Protection for solid-state switchProcess Cautions Sitrans LC 500 Standard Level Version Interconnection WiringInterconnection Sitrans LC Supply Selecting the correct instrumentation cable Cable Which allows for 560 meters on that side Is applications maximum cable lengthMulti-drop applications maximum cable length Subtract the capacitance for the device Connection Diagram Connecting Sitrans LCTerminals Grounding instructions Where the stilling well is welded to the tank 7ML19985GE01 System Grounding referencing Grounding Examples Sitrans LCMetal Tanks Non-Conductive Tanks Cathodically Protected Metal Tanks Example Safety Grounding Hazardous area Non-hazardous area Typical PLC configuration with Hart DiagnosticsCommunications Applications for Solid-state Output Current values used as signals from digital transmitters Setting Description Factory SettingsSwitch Protection Diode Settings Interconnection Setting LCD display Sitrans LC 500 User InterfaceUser Interface Menu Levels 00 to 0F and 10 to 1F How to access the dataDescription Menu Group Details Push-buttons Rotary switchAccess to a menu item Adjusting the value Transmitter Variable User-defined Functions Units Transmitter Variables Quick Start Sequence Start-up Sitrans LCQuick Start Start Up Num Rotary Switch Positions Quick Reference To change from menu 00 to menu Menu levels 0To change from menu 10 to menu Calibration using push-button adjustment 100% value is set Changing stepsize value menuCurrent percent of span = 14/20 = 70% Start Up Calibration using Hart Start Up Number Description Number Inspections MaintenanceMaintenance Test function Maintenance Troubleshooting Troubleshooting Sitrans LCIf you are unable to change settings Error Description Cause Message Error Messages and Error CodesError Messages push-button operation Error Codes Hart Appendix a Menu Groups Menu Items Transmitter Variable Settings menu levelStepsize Update Value Rotary Left Switch Description Values Position Arrow Damping Set the rotary switch to BLower Sensor Limit Description Values Position Rotary SwitchDelta Range Setting Upper Sensor Limit Affected Rotary Left Switch Mode Affected Rotary Left Switch Mode DescriptionLower Range Value Upper Range Value Transmitter Variable Values menu levelDynamic Value, Primary Variable PV menu 00 and menu Display the Highest / Lowest Recorded Value Rotary Left Description Values SwitchRotary Switch Left Arrow Description Position To change from menu 10 to menu Set the rotary switch to Transmitter Variables Dynamic Value menu level Rotary Left Switch Mode Description Action Values Indicator Analog Output Signalling proportional or 2-state menu levelUpper Threshold Delay 2-state mode Rotary Left Added Switch Arrow Mode Description Values Position Rotary Left Added SwitchArrow Indicator Upper Threshold Setting 2-state mode Lower Threshold Setting 2-state mode Analog Signalling Mode 2-state menu level State High Rotary Left ModeState State Low 22.0 mA Analog Fault Signalling 2-stateState mode must be selected at menu For detailed information, see Fault Signalling on Identifier Cription Digital Output Signalling solid-state output menu levelUpper Threshold Delay solid-state output Rotary Left Des Switch Upper Threshold Setting solid-state output Lower Threshold Delay solid-state outputValue Indicator Cription Rotary Left Des Switch ModeLower Threshold Setting solid-state output Rotary Left Added Des Switch Mode Rotary Left Des Switch Arrow Mode Cription Action Digital Signalling Mode solid-state output= cc Rotary Left Switch Mode Digital Fault SignallingAction Values Miscellaneous Output Signal Processing TestFactory Settings Switch Left Arrow Description Display Meaning Position Range Inversion Rotary Switch Left Arrow Description Mode Values PositionProtection Display Switch Local Settings LCD alphanumeric display examples Appendix B LCD display examplesAppendix B Simatic Process Device Manager PDM Appendix C Hart DocumentationHart information Hart Device Descriptor DD Sitrans LC 500 DD Menu/Variable Organization Hart Response Code Information Command Description Usage Number Hart Conformance and Command Class Non-volatile Memory Data Storage Command Description UsageGeneral Transmitter Information Damping information Units conversions Additional Universal Command SpecificationsBurst mode MultiDrop operation Sitrans LC 500 Block Diagram Appendix D Block Diagram, and Correlation table, mA to % Range 0 100 % Current in mA Correlation % 100% to 4-20 mA or 20-4 mAAppendix D Appendix E Standard VersionStandard Version S-Series, Threaded Series Threaded Series Cable Version With weight With anchor Features Standard Version S-Series, Threaded Series, Welded Flange Features Standard Version S-Series, Flanged Series Features Standard Version D-SeriesFeatures Standard Version DD-Series Standard Version D-Series, Machined Flange Thermal isolator to prevent Features Standard Version, Probe/ Thermal IsolatorSD-Series Probe/Thermal Isolator All wetted parts made of PFA Interface Version, threaded optional sanitary and flanged Interface Version Sanitary Version Features Sanitary Version, Tri-Clamp Flange Standards Flanges Capacitance in oil Examples using dimensions above Capacitance in airApplications Examples Generic Application Calculations PF = 33.2 pF Larger tank, dimensions in feet 08.0 Device settingsCAn 90.0 CHi Application Analog fault signalling 2-state outputCurrent loop is in 2-state mode C Hi selected State fault signalling enabled F Hi selected LSL is set to 7.3 pF USL is set to 83.50 pF Appendix F Appendix F ApprovalsCE Certificate Sitrans LC 500 / Pointek CLS Wir erklären hiermit auf eigene Verantwortung, dass der CE BescheinigungHinweis Instrument label Sitrans LC Kema certificate and schedules Appendix F Appendix F Appendix F Appendix F Appendix F Appendix F Appendix F Certificates and Approvals Application SpecificationsNamur recommendation NE Approval Glossary Glossary 7ML19985GE01 Numerics IndexIndex Index Wiring Quick Reference Quick Reference Sitrans LC Rotary Switch Positions Quick Reference Page 7ml19985GE01