4Take the picture.

• Compose the shot and press the shutter button fully.

• If the “K” shutter speed and maximum aperture display blink, it means the subject is too dark. Use flash.

• If the “D” shutter speed and minimum aperture display blink, it means the subject is too bright. Attach an ND filter (sold separately) to reduce the light entering the lens.

The Difference Between <S> and <Y>

•The shutter speed and aperture value are set in the same way in both modes.

•The following features can be used in the <S> mode, but not in the <Y> mode.

· Manual AF point selection

· Custom Functions

· Metering mode selection

· Built-in flash manual firing

· Film advance mode selection

· EX-series Speedlite compatibility

· Program shift

-

FE lock

· Exposure compensation

-

High-speed sync (FP flash)

· AEB

-

Flash ratio control

· AE lock with the <j> button

-

FEB

· Depth-of-field preview

-

2nd-curtain sync

· Multiple exposures

-

Modeling flash

About Program Shift

•In the Program AE mode, you can freely change the shutter speed and aperture value combination (program) set by the camera while retaining the same exposure. This is called program shift.

•To shift the program, press the shutter button halfway and turn the <l> dial until the desired shutter speed or aperture value is displayed.

•Program shift is canceled automatically after the picture is taken.

•Program shift cannot be set when the built-in flash is used.

55

Page 54 Page 56
Page 55
Image 55
Canon EOS Elan 7NE Body Only manual 4Take the picture, Difference Between S and Y, About Program Shift
Page 54 Page 56
Top Page Image Contents