eEye Control Calibration (m Model only)

Eye Control Calibration and Operation Tips

Hold the camera as you always do while looking through the viewfinder.

Look through the viewfinder so you can see all four corners of the viewfinder.

Avoid squinting or blinking your eye.

When using Eye Control, look through the eyepiece in the same way you did during the calibration.

During the calibration procedure, keep looking (without moving your eye) at the blinking AF point until it lights and the beeper sounds.

Keep both eyes open while looking through the viewfinder.

If you wear eyeglasses, wear them properly without having them slide down your nose.

Eye Control calibration and operation might not be possible in the following cases:

When you wear bifocal eyeglasses or hard contact lenses.

You wear mirror-type sunglasses or other specially-coated glasses.

Your eye is too far away from the eyepiece due to eyeglasses, etc.

Your eye is too close to the viewfinder.

Intelligent Eye Control

You can repeat the calibration procedure under different conditions such as when you are outdoors, indoors, or at night. The camera can save these additional calibration settings under the same CAL No. By accumulating more calibration settings, the camera can provide more precise Eye Control.

Two or more users must not share the same CAL No. Each user should have his or her own CAL No. If necessary, delete the calibration settings saved under another CAL No. to store another user’s calibration settings. (p.47)

46

Page 46
Image 46
Canon EOS Elan 7NE Body Only manual Intelligent Eye Control