Philips DVDR3370H manual KProgramming a recording Timer, Recording mode M1/M2/M2x/M3/M4/M6

KProgramming a recording (TIMER)

General

Use programmed recording (TIMER) to automatically start and stop a recording at a later date. The DVD Recorder will switch to the right channel and begin recording at the correct time. With this DVD recorder, you can pre-program up to 6 recordings within a period of one year.

To make a programmed recording, your DVD Recorder needs to know: * the date of the recording

* the channel number of the TV channel * the start and stop time of the recording

* the recording mode ('M1/M2/M2x/M3/M4/M6')

Fit to space Recording
You can select also the recording mode 'FR' .
With these setting the recording mode (bit rate) will be automatically
calculated to use the complete empty space (title 'Empty').
If the empty space is too small the recording will be stopped to prevent	Tip
the following titles from being overwritten.

This information is saved in a TIMER block.

Before you begin, make sure the clock is set. If the clock is not set, the 'Time/Date' menu will appear when you press the TIMER s button.

Programming a recording with the 'VCR Plus+® system'

Thanks to this programming system, you no longer need to tediously enter the date, TV channel, start and end times. All the information needed for programming is contained in the PlusCode programming number. This 8-digit PlusCode number is found in most TV listings for magazines.

1Switch on the TV. Select the channel number for the DVD Recorder (channel 3 or 4 or the Audio/Video In channel).

2With the Recorder on, press TIMER s on the remote control. The programming method selected last is marked.

3Select line 'VCR Plus+ system' using B or A and confirm with C .

ENGLISH

Programming a recording (TIMER) 83