Star Micronics XB24-15 Special print mode control codes, Select/cancel, expanded, printing, Both

Special print mode control codes

Select/cancel	expanded	printing	Both
<ESC>	W	cn>
1Bh	57h	Cn>
I 27	87	<n>	I

The command above selects or cancels expanded printing, where <n> is a binary or ASCII value from OOhthrough Olh or “0” through “1”. If <n>=OOhor “O”, then expanded printing is deselected (cancelled), and if ol>=Olh or “1”. then expanded printing is selected for all printing subsequent to the receipt of this command.

Select one-We expanded printing Both

<ES0<so>

1BhOEh

2114

<so>

Either of the commands above will select one-line expanded print. There are no parameters. Expanded printing will be performed subsequent to the receipt of this command until any of the following commands is received: cDC4>, <LD, cESC>

.&Pa, <VT>, cFFb, cESC> d;D, <ES0 W or <FS> E.

$Zancelone-line expanded print Both

<DC4>

14h

20

The command above cancels tbe.one-line cESC> <SO>. There are no parameters.

1

expanded print mode set by <SO> or