Star Micronics XB24-10, XB24-15 user manual Select bit image mode, thus both adjecent

Select bit image mode					IBM
<ESC>	[	I3	db	cnl>	cm>
<do>	. . .	<dn>
1Bh	5Bh	67h	<no>	al>	cm>
<do>	. . .	cdn>
27	91	103	edb	ull>	cm>
<do>	. . .	cdn>

The command above selects the bit image mode for graphical printing, and gives the number of bytes to be printed, where cn0, and al> (low byte first) give the number of graphical data bytes represented by <do> through cdn>, and on> represents the graphics mode, as represented in the table below:

*Adjacent dots are not printable in these modes lRelationship of bit number to dot position]

The total number of graphical blocks to be printed is given by the formula (<nO>+<nl>x256)-1. When the printer is printing bit-image data in IBM mode, the relationship of bits transmitted to dots printed is as follows:

thus:

both adjecent

58