Star Micronics XB24-15, XB24-10 user manual Mode Panel Lock, Font Panel Lock, Font Setting

Mode Panel Lock

If the :3EJ button is pressed when the printer is turned on, the mode will be “locked”, and no mode changes can be made from software. It is still possible, however, to put the printer off-line and change the mode using the I’YODEbutton.

FONT SETTING

Pressing the C! button will illuminate a font indicator. Remember that the printer must be off-line for you to do this. Note that the selection of some fonts (shown in yellow on the front panel) is shown by an orange indicator, and the selection of others (shown in green on the front panel) is shown by a green indicator. Note that not every font is available in every mode (see the

table below). Holding down the ~63 button will cycle continuously between the fonts available for the mode selected.

1 Mode	1 Font	I
	TMS ROMN
	TW-LIGHT
	OPTION (when font IC card is installed)
	TMS ROMN
	W-LIGHT
	COURIER
	PRESTIGE
	HELVET

I SCRIPT

CINEMA

OFTION (when a font IC card has been installed) INTERNAL (when font has been downloaded)

1 DRAFT 1 NOFONTSELFCTED

I

1

Font Panel Lock

If the ‘---I:; button is pressed when the printer is turned on, the font will be “locked”, and no font changes can be made from software. It is still possible, however, to put the printer off-line and change the font using the ‘P+3 button.

13