Star Micronics XB24-15 Set top margin, Both, Set bottom margin, Cancel top and bottom margins

[ Set top margin Both 1

<ESC>C

1Bh63h

2799

The command above sets the top margin, where-> is a binary value which specifies the height of the top margin to the first printed line in lines (at the current line pitch setting). Printing will start on the (ot>+lth) line on the page. Subsequent changes to the line pitch setting will not affect this value.

Set bottom margin		Both
<ESC>	N	Cn>
( 1Bh	4Eh	<tD
27	78	CID

The command above sets the bottom margin, where cn> is a binary value specifying tbe bottom margin depth in lines at the current line pitch setting. If the page length is reset (with the cESC>c or <ESCX<NUL> commands), the effect of this command will be lost. Subsequent changes to the tine pitch setting, however, will not affect the length set by this command.

Cancel top and bottom margins		Both
(Esc>	0

1Bh4Fh

2779

The command above cancels the settings for top and bottom margins. There are no parameters.

1Set left and right margins Both 1

<ESC>X<IDCn>

1Bh58h

2788

The command above sets the left and right margins, where the two values repre- sented by the 01x are binary numbers used for setting the left and right margins respectively. Margins are set at the current horizontal pitch.

47