Star Micronics XB24-15 Enable unidirectional prlntlng for one line only, Both, cEsc, quiet mode

Enable unidirectional prlntlng for one line only		Both
cEsc>	C
	60	I

The command above enables unidirectional printing for one line.only. There are no parameters. printing will be performed from left-to-right for the current line only.

Enable/disable	quiet mode		Both
cEsc>	S	C?D

1Bh73h<n>

27115<rD

The command above enables or disables quiet mode, where <n> is a binary value of either Oh or Olh or an ASCII value of either “0” or “1”. If cn> is set to OOhor “O”, thenquietmodeisdisabled,andif<n>issettoOlhor“l”,thenquietmodeisenabl~.

This command overrides the Memory Switch settings or the setting made from the frontpanel.Quietmodemeanstbateachcharacterisprintedintwopassesoftheprint

head.

Enable/disable large character printing Both

<ESC>h<n>

1Bh68h<rD

27104Cn>

‘Me command above enlarges characters, or cancels such enlargement, where cn> is a binary value of OOhthrough 02h or an ASCII value of ‘0” through “2”. If UP is set to OOhor 9”. then any character enlargement is cancelled. If vu is set to 01h or “1”. then characters are printed at double height and width. If cn> is set to 02h or “2”. then characters are printed at quadruple height and width. It is the user’s responsibility to alter the line pitch,so that it is in accordance with the new character height, and to produce a line feed at the new pitch in order to leave sufficient space for the new characters. If thereare different sizes of print on the same line, the printing will be aligned along the top of the characters. Any previous commands for enlargement (vertical or horizontal) of characters will be cancelled by this com-

65