Star Micronics XB24-10, XB24-15 user manual Front Panel Diagnostic And Test Modes, Short test mode

FRONT PANEL DIAGNOSTIC AND TEST MODES

The printer is equipped with a number of different modes for diagnosis and testing. These are accessed from the front panel by holding down a front panel button (or combination of buttons) while turning on the power to the printer.

The test and diagnostic modes available am listed below

9A text test print mode

9A short test print mode

. A long test print mode

•A hexadecimal dump mode

•A bidirectional print test

Short test mode

If the printer is turned on while the T 0~u=J button is pressed, the printer will enter the short self-test mode. The printer will start printing as soon as the !ZZFFFZbutton is released, and will print the version number of the printer’s ROM, eg “*** Ver 1.0 ***“, followed by seven lines of the character set.

Each line will he offset by one character from the one before it. If the color option has been installed, each line will be in a different color. The final (black and white) result will be something like the following:

[Standard mode]

[IBM mode]

Since the test print occupies the whole width of the carriage, it is recom- mended that the printer is loaded with continuous stationery to avoid possible damage to the print head and/or platen.

86