Star Micronics XB24-10 Select next horizontal print position by dot, Move print head, Both

Select next horizontal print position (by dot)				Both
<ES0	$		Cd>
1Bh	24h	elo>	all>
27	36	elo>	OrI>

The command above will start subsequent printing at a horizontal position deter- mined by dot spacing, where 010> and oil> am two binary numbers (low byte first) specifying the number of dots (at l/60 inch spacing) by which the print head will move to the right from the left margin. If the subsequent print position is beyond the right margin, then printing will start at the left margin.

Move print head			Standard
cESC>	\	db	al>
1Bh	5Ch	<no>	al>
27	92		cd>

The command above moves the print head relative to the last print position, where ore> and cnl> are two binary numbers (low byte fast) specifying the amount (in inches) by which the print head will move from the last print position. When in draft mode, the number represented by the parameters signifies movement in 1/12Oths inch, and when in LQ or SLQ mode, movement is carried out in l/MOths inch. A positive value will move the print head to the right, and a negative value will move it to the left. See “Numerical Representation” for details of how negative values are represented in this way.

52