Star Micronics XB24-15, XB24-10 Form feed control codes, 1Select forward feed, Standard, Both

1Select forward feed Standard 1

1Ch46h

The command above selects forward paper feed. There are no parameters. This is the default setting at power-on. All vertical paper-handling commands will be executed as described.

Select reverse feed		Standard
<FS>	R
1Ch	52h
1 28	82	I

The command above selects reverse paper feed. There are no parameters. On receipt of this command, all vertical paper handling commands will be executed in a reverse direction (eg a reverse line feed will become a forward line feed, and a forward line feed will become a reverse line feed). This command is invalid if the ASF has been selected.

Form feed control codes

Form feed Both 1

OCh

12

The command above will cause a form feed. There are no parameters. On receipt of this command, the printer will print all data stored in the print buffer, and will move to the top of the next page (as determined by the form length set by cESC> C or <ESC> Cc NULB. A carriage return (to the left margin) will also take place. If the ASF has been selected, this command functions as a page eject command.

43