Star Micronics XB24-10 Set/clear, horizontal tabs, Both, Restore tabs to default settings

Set/clear	horizontal tabs				Both
<ES6	D	c&b	. . .	cd>	<NuL>
1Bh	44h	alo>	. . .	al>	OOh
27	67	c?db	. . .	cd>	0

The command above sets horizontal tabs, where ore> and -al>arc binary values representing the new tab positions. If no values are given, all tab stops are cleared. The default tab setting is every eight characters. Tabs are set at the current character pitch. If proportional spacing has been selected, then pica pitch is used for determining the positions of the tabs. In Standard mode, once the tabs have been set, tbe position of the tabs will remain the same if the character pitch is changed. In the IBM mode, the tab settings will change relative to the new character pitch if the character pitch is changed.

1 Restore tabs to default settings IBM 1

cESC>R

1Bh52h

2782

The command above restores all tabs (vertical and horizontal) to default settings. There are no parameters. On receipt of this command, all vertical tab settings will be cleared, and all horizontal tabs will be reset to every eighth position, starting at column 9.

Set relative horizontal tab positions				Both
<ESC>	e	0	Cn>
1Bh	65h	30h	<n>
27	101	48	<n>	-

The command above sets horizontal tabs, where cn> is a binary value. On receipt of this command, all horizontal tabs will be cleared, and new ones inserted every cn> characters. These horizontal tabs can be accessed with an <HT> command.

50