Star Micronics XB24-10 1Select vertical form unit VFU channel, Both, Set VFU vertical tabs

1Select vertical form unit (VFU) channel Both 1

<ESC>IOn>

1Bh2Fh On>

2747On>

The command above selects a VFD within which all subsequent <VT> commands will be executed, where on> is a binary value from 0 to 7. Different sets of vertical tabs can be stored in different channels using the <ESC> b command, and selected using this command.

Set VFU vertical tabs						Both	_
<ESC>	b	On>		. . .	cd>	<NuLa
1Bh	62h	On>	-Mb	. . .	all>	OOh
27	98	cm>	cnO>	. ..	cd>	0

The command above sets vertical tabs inside a VFD, where on> is the VFU channel (olcmX7) (accessed by the cESC> / <m> command), and subsequent absolute values (in lines) of vertical tabs (accessed by the <VT> command) are represented by oto> to otl>. These values must be given in ascending order, otherwise the command will be terminated. The sequence must end with a <NuL> @Oh).If no vertical tab values are given between the channel number and the 4IUL>, then all previous vertical tab positions set for that channel will be cleared.

I Set relative vertical tab positions			Both 1
<ESC>	e	1	<n>
I lBh<	65h	31h
	101	49

The command above will set relative vertical tab positions, where cn> is a binary value giving the distance in lines between vertical tabs set by this command. The vertical tabs set by this command are subsequently accessed by the <VT> command. All vertical tabs previously set are cleared. Instead of the ASCII “l”, the binary 01h character can be used.

46