Pioneer SH-DT510 manual Using the Tuner, Switching the Tuner On and Off

Chapter 4: Using the Tuner

Introduction

Once the channels are downloaded, you can start enjoying the full range of video and audio programs. Operating the tuner is extremely easy. You can control the show tuner directly from the Front Panel or with the RCU as described below. The tuner's menu provides access to a listing of all the channels configured on your tuner and parental controls that allow you to access or restrict sensitive programming, as well as the various audio options.

Switching the Tuner On and Off

You can use the Standby/On button on the RCU to alternate the tuner between ON and Standby modes.

Using the Menus and Remote Control Unit (RCU)

Just by pressing the buttons on the RCU, you can operate most common functions, such as selecting the programs, displaying Information and adjusting the volume. But to access some of the more complicated functions (such as Digital TV channel setting, program listing and system settings) or to configure the tuner, you will need to use the on-screen menus. Most functions can be accessed either via the buttons on the Front Panel of the tuner or with the RCU. However, for items that require numeric inputs, the RCU must be used. There are two ways to access the various menu items:

1.Press the "MENU" button, highlight the required item with the navigation button (￿/￿/￿/￿), press "ENTER" button and continue moving through the menus until you find the item you desire.

2.Select LIST, FAV. from RCU to directly access the service.

To close the menu or navigate back in the menu hierarchy, press the "RETURN" button.

23