OPERATION

CAUTION:

Never cover air vents. They must always be open for proper motor cooling.

SWITCH

See Figure 5.

This tool has a spring loaded switch. To turn your grinder ON, push the switch button forward. Release the switch button to turn your grinder OFF.

LOCK-ON FEATURE

See Figure 5.

Your grinder has a lock-onfeature that is convenient when continuous operation for extended periods of time is required. To lock-on, push the switch button forward then push down at the front of the switch button. To release the lock, depress the rear of the switch button and release it.

GRINDING

See Figure 6.

Always carefully select and use grinding wheels that are recommended for the material to be ground. Make sure that the minimum operating speed of the grinding wheel selected is not less than 11,000 rpm. The grinding wheel provided with your grinder is suitable for grinding welds, preparing sur- faces to be welded, grinding structural steel, and grinding stainless steel.

Secure all work before beginning a grinding operation.

Secure small workpieces in a vise or clamp to a workbench.

Never use your grinder with the guard removed.

Never use your grinder without wearing eye protection.

The key to efficient operation begins by controlling the pressure and surface contact between the grinding wheel and workpiece. Flat surfaces are ground at an acute angle, normally between 5 to 15 degrees.

For maximum control, hold the grinder in front and away from you with both hands, keeping the grinding wheel clear of the workpiece. Start your grinder and let the motor and grinding wheel build up to full speed. Gradually lower grinder until the grinding wheel contacts the workpiece.

For best results keep the grinder tilted at an angle from 5 to 15 degrees and continuously moving at a steady, consistent pace. Move the grinder back and forth or up and down over the work area. Keep the grinder moving so that an excessive amount of material is not removed from one area. If the grinder is held in one spot too long, it will gouge and cut grooves in the workpiece. If the grinder is held at too sharp an angle, it will also gouge the workpiece because of concentration of pressure on a small area.

Use just enough pressure to keep the grinder from chattering or bouncing. Heavy pressure will decrease its speed and put a strain on the motor. Normally the weight of the tool alone

SWITCH

ON

 

BUTTON

OFF

TO

LOCK-ON

SWITCH BUTTON

Fig. 5

 

5° TO 15°

Fig. 6

is adequate for most grinding jobs. Use light pressure when grinding jagged edges or loose bolts where there is the potential for the grinder to snag on the metal edge.

Lift the grinder away from the workpiece before turning your grinder off.

Page 10

Page 9 Page 11
Page 10
Image 10
Ryobi G1151C specifications LOCK-ON Feature, Grinding, LOCK-ON Switch Button
Page 9 Page 11

G1151C specifications

The Ryobi G1151C is a versatile and powerful electric generator designed to meet the demands of various applications, from home backup to outdoor activities. As a part of Ryobi’s robust line-up of power tools and equipment, the G1151C stands out due to its combination of efficiency, portability, and user-friendly features.

One of the main features of the G1151C is its impressive power output. It boasts a peak wattage of 2200 watts, allowing it to handle essential appliances and power tools with ease. This peak power is supplemented by a continuous running wattage of 1800 watts, making it an ideal choice for powering everything from refrigerators and lights to small power tools during construction or DIY projects.

The Ryobi G1151C utilizes an advanced inverter technology, ensuring a clean and steady power supply. This is particularly beneficial for sensitive electronics such as laptops and smartphones, which require stable power without fluctuations. The generator operates quietly, thanks to its noise-reduction features, making it suitable for use in residential areas or during camping trips where noise might be a concern.

Portability is another hallmark of the G1151C. It features a lightweight and compact design, weighing just 47 pounds, and comes equipped with a comfortable handle for easy transport. The generator is built for convenience, featuring an easy-to-read LED display that provides crucial information such as wattage usage and fuel levels, ensuring users can monitor performance with ease.

Fuel efficiency is a key characteristic of the Ryobi G1151C. It operates on gasoline and is designed to run for extended periods—up to 8 hours on a single tank of fuel at half load. This efficiency makes it perfect for camping, outdoor events, or emergency power outages, allowing users to rely on it without frequent refueling.

Safety features are integrated into the design, including low oil shutdown and overload protection. These mechanisms ensure the generator operates optimally while protecting both the unit and connected devices from damage.

In summary, the Ryobi G1151C embodies a blend of portability, power, and safety, making it a dependable choice for anyone in need of reliable electricity in a compact package. Whether for home use or outdoor adventures, this generator is engineered to provide performance and user satisfaction.
Top Page Image Contents