ADJUSTMENTS

WARNING:

Your grinder should never be connected to power supply when you are assembling parts, making adjustments, installing or removing grinding wheels, or when not in use. Disconnecting your grinder will prevent accidental starting that could cause serious injury.

INSTALLING THE SIDE HANDLE

See Figure 2.

■UNPLUG YOUR GRINDER.

WARNING:

Failure to unplug your grinder could result in accidental starting causing serious injury.

■Install the side handle by screwing it into the side of the gear housing.

NOTE: The handle can be installed on either the left or right side of the grinder, depending on operator prefer- ence. It must always be used to prevent loss of control and possible serious injury.

■Tighten side handle securely.

INSTALLING THE GRINDING WHEEL

See Figure 3.

■UNPLUG YOUR GRINDER.

WARNING:

Failure to unplug your grinder could result in accidental starting causing serious injury.

■Your grinder is shipped with the disc flange and clamp nut attached to the spindle.

■Depress spindle lock button and rotate clamp nut until spindle locks.

■Loosen and remove clamp nut from spindle. Do not remove disc flange.

■Make sure flats on disc flange are engaged with flats on spindle.

■Place the grinding wheel over the spindle with the concave side of the wheel facing up.

WARNING:

Always install grinding wheel with the depressed center against the disc flange as shown in figure 3. Failure to do so will cause the grinding wheel to crack when tightening the clamp nut. This could result in serious personal injury because of loose particles breaking off and being thrown from the grinder.

GEAR

HOUSING

SIDE

HANDLE

Fig. 2

TO

TIGHTEN WRENCH

TO

LOOSEN

CLAMP

NUT

GRINDING

WHEEL

DISC

FLANGE

SPINDLE

FLAT(S)

SPINDLE

LOCK BUTTON

Fig. 3

■Thread the clamp nut on the spindle with the flat side of the nut facing up. Fit the raised, small diameter portion of the clamp nut into the hole in the grinding wheel and finger tighten.

■Depress the spindle lock button and rotate the wheel clockwise until the spindle locks in position.

■Securely tighten the clamp nut with the wrench provided.

Page 8

Page 7 Page 9
Page 8
Image 8
Ryobi G1151C specifications Adjustments, Installing the Side Handle, Installing the Grinding Wheel, Unplug Your Grinder
Page 7 Page 9

G1151C specifications

The Ryobi G1151C is a versatile and powerful electric generator designed to meet the demands of various applications, from home backup to outdoor activities. As a part of Ryobi’s robust line-up of power tools and equipment, the G1151C stands out due to its combination of efficiency, portability, and user-friendly features.

One of the main features of the G1151C is its impressive power output. It boasts a peak wattage of 2200 watts, allowing it to handle essential appliances and power tools with ease. This peak power is supplemented by a continuous running wattage of 1800 watts, making it an ideal choice for powering everything from refrigerators and lights to small power tools during construction or DIY projects.

The Ryobi G1151C utilizes an advanced inverter technology, ensuring a clean and steady power supply. This is particularly beneficial for sensitive electronics such as laptops and smartphones, which require stable power without fluctuations. The generator operates quietly, thanks to its noise-reduction features, making it suitable for use in residential areas or during camping trips where noise might be a concern.

Portability is another hallmark of the G1151C. It features a lightweight and compact design, weighing just 47 pounds, and comes equipped with a comfortable handle for easy transport. The generator is built for convenience, featuring an easy-to-read LED display that provides crucial information such as wattage usage and fuel levels, ensuring users can monitor performance with ease.

Fuel efficiency is a key characteristic of the Ryobi G1151C. It operates on gasoline and is designed to run for extended periods—up to 8 hours on a single tank of fuel at half load. This efficiency makes it perfect for camping, outdoor events, or emergency power outages, allowing users to rely on it without frequent refueling.

Safety features are integrated into the design, including low oil shutdown and overload protection. These mechanisms ensure the generator operates optimally while protecting both the unit and connected devices from damage.

In summary, the Ryobi G1151C embodies a blend of portability, power, and safety, making it a dependable choice for anyone in need of reliable electricity in a compact package. Whether for home use or outdoor adventures, this generator is engineered to provide performance and user satisfaction.
Top Page Image Contents