Omron BUM150S, BUM300S, BUM100S instruction manual Replacement battery pack

4.Remove the 4 battery packs by pulling on the pullout label at the bottom of each battery pack.

Caution

Do not hold the connector of cable of the battery pack.

Use the red tape on top of the battery pack, which is 10 cm

from the inner edge of the battery, to gauge how much further you need to pull the battery to remove it. Hold the battery securely with both hands so as not to drop it.

Red tape

Battery connector

Battery pack

Pullout label

(Pull here to remove the battery pack.)

5.Insert 4 new battery packs into the additional battery unit as far as they will go. ➀

●Replacement battery pack

For BUM300S : Model number BP150XS (4 required)

Attach the plate cover.

Align the teardrop-shaped screw hole at the top of the plate cover with the additional battery unit's top screw hole. ➁

Use a screwdriver to securely tighten (turn clockwise) the 3 removed screws. ➂

Do not pinch the cable with the plate cover.

2

Tighten the 3 screws.

1

3

13