2. Preparation
2.1Removing the Insulating Tape
Pull the insulating tape out from the battery compartment by catching hold of the outer part for the first time.
2.2Switching between °C and °F
This unit is set in °C as default.
1. While the power is off, press and hold the START button.
2. While holding it down, press and hold the ON/MEM button until °F appears on the display with 2 beeps.
4
Notes:
• To select the °C mode, start from step1.
• When the unit is switched between °C and °F, all the readings stored in the memory are deleted.
