3. Using the Unit
3.2Using the Memory Function
This unit automatically stores the results up to 9 sets after each measurement.
Note: If the memory is full, the unit will delete the oldest reading.
1.
2.
3.
Press the ON/MEM button to turn on the unit.
Press the ON/MEM button again.
The memory number appears on the display.
Release the ON/MEM button.
The most recent result will appear on the display.
Press the ON/MEM button repeatedly to view the older results.
4. Press and hold the ON/MEM button until “OFF” appears on the display to turn off the unit.
It will automatically turn off after 1 minute.
10
