Omron Gentle Temp 520 instruction manual Attaching a Probe Cover

2. Preparation

2.4Attaching a Probe Cover

Always use a new and undamaged OMRON MC-EP2 probe cover.

1. Gently twist off the probe cap.

Note: Do not forcibly remove the probe cap.

2. Place a new probe cover on the connection ring.

Note: The adhesive side of probe cover should be upward.

Place Adhesive Side Upward

Probe cover

Connection ring

3. Insert the probe into the probe cover on the connection ring until it clicks.

Note: When the probe cover is not attached correctly, the probe cover symbol “” will flash on the display and a measurement can’t be taken.

6