6. Taking a Measurement
24
5. While maintaining the same posture, press the START button.
The measurement takes about 30 seconds to complete. The unit beeps every
second during measurement.
During measurement, the screen displays the ECG waveform and the progress
bar at the bottom of the screen displays measurement progress a nd a guide to the
heart rate.
Depending on the waveform, situations can occur in which the device cannot
assess and display the heart rate during the measurement.
Notes:
•During m easurement the device will only respond to the button to
discontinue the measurement.
•If the contact of the electrodes becomes loose, or the conditions change during
measurement, the measurement may not be correct.
Important: Keep still and do not move until the measurement is complete.
Measurement starts During measurement
The unit beeps every second.
About 30 seconds
The measurement ends
automatically, indicated
by 4 rapid beeps.
Measurement ends
HCG-801-E.book Page 24 Tuesday, December 13, 2011 5:35 PM