9. Managing ECG Data
45
EN
Copying data from a PC to the SD memory card
Please follow these instructions to copy data from a PC to the SD memory card.
1. Make sure the PC is equipped with an SD memory card port or connect a
commercially available SD memory card reader/writer to your PC.
2. Insert the SD memory card in the SD port of your PC and confirm that there is an
“hcg801” folder in the SD memory card. If there is not, format the SD memor y card
in the HCG-801 as described in section 4.2 of the HCG-801 instruction man ual.
3. Browse to the folder where you saved the ECG data in the PC. Select all files and
copy them to the SD memory card in the *:\hcg801\data\ folder (where * stands for
the character of a removable disk)
4. When copying is finished, insert the SD memory card in the HCG-801 as
described in “4.1 Inserting and Ejecting SD Memory Card” on p. 15.
5. Do not store more than 300 measurement files in this folder on the SD memory
card. When more than 300 files are copied in this folder, the HCG-801 will display
an error message when activated.
HCG-801-E.book Page 45 Tuesday, December 13, 2011 5:35 PM