Pile side material
Sewn hook material
D-ring

4.Using the Monitor

4. Using the Monitor

4.1Applying the Arm Cuff

You can wrap the cuff either on your right or left arm.

Remove tight-fitting clothing from your upper arm.

• Do not place the cuff over thick clothes and do not roll up your sleeve if it is too tight.

1. If the cuff is assembled correctly, the hook material will be on the outside of the cuff loop and the metal D-ring will not touch your skin.

Note: If the cuff is not assembled,

pass the end of the cuff fur- thest from the tubing through

the metal D-ring to form a loop. The smooth cloth should be on the inside of the cuff loop.

2.Insert the air plug into the air jack (on the left side of the device).

Air plug

EN

Air jack

The cuff must be fully deflated when it is inserted into the air jack.

11

Page 11
Image 11
Omron M6 instruction manual Using the Monitor Applying the Arm Cuff