3. Preparing the nebuliser for use
Warning:
Clean and disinfect the nebuliser kit, mouthpiece and nosepiece or masks before using them for the first time after purchase, if the device has not been used for a long period of time, or if more than one person uses the same device.
For directions on cleaning and disinfecting refer to Section 5 (page
Note: Make sure that the air filter is changed regularly. Refer to Section 7 “Changing the air filter” (page 23).
3.1Connecting AC adapter
1.Make sure that the power switch is turned off.
Check that the power switch is in the off ( 
) position.
2.Inserting the power plug of the
AC adapter into the power connector on the compressor.
Power Plug
Power Connector
3.Plug the AC adapter into a power outlet.
Note: When disconnecting the AC adapter, unplug the AC adapter from the power outlet before removing the power connector on the compressor.
Power Outlet
10
