Omron R7 instruction manual Position sensor, Left or right wrist measurement, Alarm

R7 English

Position sensor

The position sensor of your OMRON R7 can be switched ON or OFF. In the factory preset the position sensor is enabled. If the position sensor is switched ON you can choose to have the optimal wrist height supported by an acoustic sound (SIGNAL ON or OFF).

Position Sensor Screen	Position Sensor OFF	Position Sensor ON and
	Screen	SIGNAL OFF Screen

Left or right wrist measurement

Normally blood pressure is measured on the left wrist (factory preset). With your OMRON R7 you can choose to use the monitor either on your left or right wrist. It is recommended to use the same wrist when for optimal comparisons of your blood pressure fluctuations.

Measuring (Wrist) Screen	Measuring (Wrist) Right
Alarm	Wrist Screen

Your blood pressure monitor has the possibility to set an alarm twice a day. The alarm function can be used to monitor your blood pressure at the same time every day or as a reminder for pill intake.

The alarm will sound for 2 minutes. By pushing the on/off button the alarm will stop. The alarm will not sound when the blood pressure monitor is used (e.g. for measuring or graph display) at the moment the alarm is set.

You can set the requested hour by pushing (		) when flashing. Press SET to lock the hour
and proceed with the minutes. By pushing the (			) you can set the minutes. Press SET to
confirm and to proceed. Push either (	) to enable (			) or disable (	) the alarm. Press
SET to lock the settings.

Alarm Screen	Screen of indicating that
	the alarm is sounding

15