Omron Healthcare 705IT Maintenance and storage, Technical data, Similar solvents

Maintenance and storage

•	For cleaning the monitor only use a soft, lightly
	moistened cloth.
	Do not use petroleum spirits, thinners or
	similar solvents !
•	Stains on the cuff can be carefully removed using
	a moist cloth and soapy water.
	Do not wash the cuff or make it wet !
•	Keep your blood pressure monitor in the storage
	case to protect it from dust and moisture.
•	Protect your monitor against vibrations and do not
	leave it in a place where temperatures are
	extremely low (below -20°C) or extremely high
	(above 60°C) or with high humidity (+ 85%).
•	Do not use your monitor at very low temperatures
	(below 10°C) or very high temperatures (above
	40°C).
• Do not fold the cuff or air tube together too tightly
	and do not crease them.
•	Do not carry out repairs of any kind yourself.
	If a defect occurs, consult the OMRON distributor
	or Customer Services or seek the advice of your
	surgical appliance stockist or pharmacist.
•	The accuracy of this blood pressure monitor is
	designed to last a long time.
• In order to increase the lifetime of the batteries
	take them out when you store the device for a
	longer period than 2 months.
•	Electro-magnetic fields can influence the
	measurement. Do not use a portable phone near

Technical data

Model:

Display:

Blood Pressure

Measurement Range:

Accuracy:

Memory:

Inflation:

Deflation:

Pressure Detection:

Measurement Method:

Power Source:

Battery Life:

Operating Temperature: Storage Temperature: Humidity:

Storage humidity: Console Weight: Outer Dimensions: Cuff Dimensions:

Accessories:

English

This device fulfils the provisions of the EC directive 93/42/EEC (Medical Device Directive). This blood pressure monitor is designed according to the European standard EN1060, Non-invasive sphygmomanometers Part 1: General requirements and Part 3: Supplementary requirements for electromechanical blood pressure measuring systems.

OMRON 705IT LCD digital display

Pressure: 0 mm Hg to 299 mm Hg

Pulse: 40 – 180/min.

Pressure: ±3 mm Hg

Pulse: ±5% of reading 28 measurements

Fuzzy-Logic controlled by electric pump Automatic pressure release valve Capacitive pressure sensor Oscillometric method

4 Alkaline batteries 1.5V (Type LR6) or AC/DC adapter (optional, 6V = 4W)

Capacity of new batteries is approx. 300 measurements

10°C to 40°C -20°C to 60°C

15 to 90% RH maximum

10 to 95% RH maximum Approximately 380g without batteries Approximately 115 (l) mm x 177 (w) mm x 71 (h) mm

Approximately 140 mm x 480 mm (arm circumference 22 – 32 cm)

Medium cuff, CD-ROM, USB cable, instruction manual, storage case, battery set

18

this unit.

NOTE: Subject to technical modification without prior notice

•Disposal of this product and used batteries should be carried out in accordance with the national regulations for the disposal of electronic products.

= Type B

19