USING THE MEMORY FUNCTION
NOTES: • The measurement value number is displayed briefly in the Pulse Display area when you press
the Up/Down buttons (
).
• The date and time are alternately displayed with the measurement values.
• If the date and time are not set,
• Press the button repeatedly to display the next values.
• Press and hold the button to display the values faster.
Alternating 
display
TO DELETE ALL VALUES STORED IN THE MEMORY The values stored in the memory are deleted by USER ID.
You cannot partially delete values stored in the memory. All values for the user you select will be deleted.
1.Press the START/STOP button to turn the monitor on.
2.Select your USER ID (A or B).
3.While holding the Down button (
), press the START/STOP button down for more than five seconds until the display appears as it does in the following illustration.
4. Press the START/STOP button to turn the monitor off.
NOTE: The monitor will automatically turn off after five minutes.
20
