HOW TO TAKE A MEASUREMENT
Be sure to read “How to Apply the Arm Cuff” before taking a reading
1.Press the ON/OFF button.
a)All display symbols appear for approximately one second. This is the initial LCD test.
b)The display symbols disappear and the Deflation Indication symbol ( 
) starts to flash.
c)When the monitor completes the necessary preparations before measurement, the Heart Symbol ( 
) appears in the screen.
2.By pressing the START button the unit automatically inflates the cuff to 170 mmHg.
a)If during your measurement the monitor determines that a higher pressure value is required, it will automatically increase the pressure value by 40 mmHg.
b)To inflate higher than 210 mmHg, press and hold the START button until the desired pressure value is reached (approximately 40 mmHg higher than your estimated systolic blood pressure).
Do not inflate higher than 280 mmHg
Initial
LCD Test
Deflation Indication
Ready
to Measure
11
