Care and Cleaning (con’t)
How to remove scale from the ice making system.
Cleaning this machine involves adding a solution of scale remover and water to the ice machine and continuing to add it as it makes ice. The scale remover must be diluted to the correct ratio. A squirt bottle will make adding the scale remover much easier when the unit is built in. If not built in, remove the top panel for reservoir access.
Recommended tools: Rubber gloves, squirt bottle & scale remover.
.
1.Scoop out and discard all of the ice.
2.Press and release the On/Off button.
ON/OFF | ICE | CHECK | TIME TO | CLEAN | |
RESET | |||||
| MAKING | WATER | CLEAN |
3.Open door and locate screws at upper back wall of bin. Remove the two screws
ON/OFF ICE | CHECK | TIME TO | CLEAN |
MAKING | WATER | CLEAN | RESET |
Screws
4.Remove the back panel of the bin by lowering it down past the scoop holder, feel free to rotate the scoop holder loop down to make more room.
Care and Cleaning (con’t)
| Float Valve |
Reservoir Cover | On/Off Lever |
| |
Release Tab |
|
5.Push tab on front edge of reservoir cover and remove the cover. Note: Adjacent wires are low voltage and are not hazardous.
Push Tab
Lift reservoir cover to remove
10 | 11 |
