BATTERY INSTALLATION
The battery is installed in the pedometer when this unit is purchased.
Low Battery Indicator
When the Low Battery Indicator appears on the display, immediately replace the battery with a new CR2032 battery.
When the battery is removed from the unit the settings and all data stored in the memory will be erased. Be sure to write important data stored in the memory in a notebook.
1.Remove the screws on the battery cover located on the back of the unit.
Use a small screwdriver to remove the screws on the battery cover.
2. Remove the battery cover.
BATTERY INSTALLATION
3.Remove the old battery.
Take the battery out with a thin stick is not 
easily breakable.
NOTE:
• DO NOT use a pair of metal tweezers or a screwdriver.
CAUTION
Dispose of the device, battery, and components according to applicable local regulations. Unlawful disposal be cause environmental pollution.
CAUTION
Do not throw the battery into fire. The battery may explode.
4. Insert the new battery.
Place the positive (+) side of the battery upward. Insert the battery in the direction of the arrow as illustrated.
5.Replace the battery cover.
Insert the projected portion of the battery cover as illustrated.
Tighten the screws on the battery cover.
After installing the battery, set time of day. Refer to “Setting the Time” on page 7.
14 | 15 |
