![](/images/new-backgrounds/1250806/25080627x1.webp)
How to Clean the Unit after Inhalation
Be sure to clean and store the unit after inhalation.
If you do not clean the unit after inhalation, medication will be dried and adhered, and will not nebulize normally the next time. If this happens, clean the Mesh Cap by boiling to wash off the adhered medication. (Refer to Page 16.)
1Remove the parts from the Main Unit.
Remove Inhalation Mask or Mouthpiece, Mask Adapter, and
Medication Bottle from the Main Unit. | (Refer to Page 9.) |
Correct Use of the Unit
2Discard the remaining medication.
After removing the Mesh Cap, open the Medication Bottle
Cap and discard the medication. | (Refer to Page 9.) |
How to Care the Unit after Inhalation
(1)
Lift up the Mesh Cap by applying your thumb on the brim.
(2)
Lift up the Mesh Cap perpendicular to the Medication Bottle.
Discard the remaining
Do not insert yourmedication. finger into the
Nebulization Port.
Disengage the Medication Bottle Cap Locking Lever and open the Medication Bottle Cap.
(3)
3Wash the parts sufficiently in water.
Wash Inhalation Mask or Mouthpiece, Mask Adapter, Medication Bottle, and Mesh Cap in water.
-Carefully wash the Mesh when using a medication having high surface activity or viscosity such as medication solubilizing agent or expectorant because the medication is often left on the Mesh.
-Please be careful not to spray water on the Main Unit.
14