How to assemble the unit and fill the medication container
When using the unit for the first time or after not using it for a long period of time, clean and disinfect the medication container, mesh, mask adapter, mouthpiece and mask. Refer to page 15 for instruc- tions.
1. Insert batteries or use the (optional) AC adapter, see page 8 and 9.
2. Remove the medication container from the main unit. To do so, push on the release buttons on both sides. This will disengage the latch mechanism.
How to assemble the unit and fill the medication
4. Fill the medication container as illustrated. The maximum capacity is 7 ml.
3.Remove the mesh cap by placing your thumb under the rim, gently pushing up, tilt the
cap back until perpendicular and lift straight up.
Hold the medication bottle as illustrated.
Do not touch the mesh!
Medication container release Buttons
Lift up the Mesh Cap by placing your thumb under the rim.
5. Install the mesh cap
Do not touch the mesh!
The mesh cap seals the medication bottle. Confirm if the cap is securely installed.
6. Install the medication container on the main unit
10 | 11 |
