thanK You
Thank you for purchasing the ONE FOR ALL Signal Amplifier. ONE FOR ALL continuously strives to develop, produce and market
the proDuCt
The ONE FOR ALL Signal Amplifier is designed to boost the signals of your antenna or cable box, this allows you to distribute the signal to multiple devices and/or use longer cable/cables without losing picture and sound quality.
Below you’ll find the description of your ONE FOR ALL Signal Amplifier (see picture 1).
1a: Power plug
B: Signal input
C: Signal outputs
D: 1 meter of
ConneCtInG the SIGnal aMplIfIer
To connect your ONE FOR ALL Signal Amplifier, please follow the steps below.
•1 Connect your TV(s) or other devices to the signal outputs (C
•2 Connect your antenna/cable box or other devices (see picture 3) to the input (B) on the ONE FOR ALL Signal Amplifier using the 1 meter
•3 Plug the ONE FOR ALL Signal Amplifier into the mains.
As situations vary, please find some different examples of use (pictures 2 – 5):
2An antenna is connected to the ONE FOR ALL Signal Amplifier. The signal will be boosted and distributed to up to 2 TVs.
3An antenna is connected to the Satellite receiver which is connected to the VCR. The VCR is connected with the 1 meter
4A cable box is connected to the ONE FOR ALL Signal Amplifier. The signal will be boosted to up to 2 TVs.
5A FM antenna is connected to the ONE FOR ALL Signal Amplifier which will boost the signal and distribute it to up to 2 radio tuners.
(*)It may be possible that you have to use inline
If the picture or sound quality is unsatisfying, please follow the helpful hints below.
•If the incoming signal is unclear, the ONE FOR ALL Signal Amplifier will not improve your
picture as it will also amplify the noise in the signal. Please contact your antenna or satellite installer for further details.
•Check all the connections. Loose or bad connections will result in an unclear picture.
note:
uK products will be supplied with a uK 3 pin power plug.
2 | WWW.ONEFORALL.COM |
