Colour and Brightness

Depending on the functions of your original remote control, the ONE FOR ALL may operate the colour and brightness settings of your television.

Colour (+)

= Press and release MAGIC

then hold Volume (+)

Colour (-)

= Press and release MAGIC

then hold Volume (-)

Brightness (+) = Press and release MAGIC

then hold Channel (+)

Brightness (-)

= Press and release MAGIC

then hold Channel (-)

Note: You have 5 seconds to press the Volume or Channel keys for colour or brightness adjustment after pressing MAGIC.

Quick Code Reference

Write down the code for your device in the boxes below and in the battery compartment for quick and easy reference.

Brand

Code

1._________________________

■ ■ ■ ■

 

 

Problem & Solution

Problem:

Solution:

 

 

Your brand is not listed

Try the search method on page 7.

in the code section?

 

 

 

The ONE FOR ALL does

A) Try all the codes listed for

not operate your

your brand. B) Try the search

device ?

method on page 7.

 

 

The ONE FOR ALL is not

You may be using the wrong

performing commands

code. Try repeating the Direct

properly?

Set-Up using another code listed

 

under your brand or start the

 

search method over again to

 

locate the proper code.

 

 

Problems changing

Enter the programme number

channels?

exactly as you would on your

 

original remote.

 

 

The ONE FOR ALL does

Make sure you are using new

not respond after

batteries and are aiming the one

pressing a key?

for all at your device.

 

 

The red light does not

Replace batteries with 2 fresh,

blink when you press

new “AA” alkaline batteries.

a key?

 

 

 

8

WWW.ONEFORALL.COM

Page 8
Image 8
One for All Univeral Remote Colour and Brightness, Quick Code Reference, Problem & Solution, Problem Solution