Search Method
If your device does not respond to the ONE FOR ALL after you have tried all the codes listed for your brand, try searching for your code. The Search Method allows you to find the code for your device by scanning through all the codes contained in the memory of the ONE FOR ALL. The Search Method may also work if your brand is not listed at all.
To search for your TV code:
1Switch your television on (not on standby).
2Press and hold the MAGIC key until the POWER key (LED) blinks twice (the red light (LED) underneath the POWER key will blink once then twice).
3 | Press 9 9 1. The red light will blink twice. |
4 | Next, press POWER. |
5Aim the ONE FOR ALL at your Television. Now press CH+ over and over, until your Television turns off (everytime you press the CH+ key the ONE FOR ALL will send out a POWER signal from the next code contained in the memo- ry). You may have to press this key many times (up to 150 times) so please be patient. If you skip past a code, you can go to the previous code(s) by pressing the CH- key. Remember to keep pointing the ONE FOR ALL at your Television while pressing this key.
6As soon as your television turns off, press MAGIC to store the code.
Important note:
-Most TV’s do not switch on pressing the POWER key. Please try pressing a “number” key or the
Once you have
Example: To blink out your Television code:
1Press and hold the MAGIC key until the POWER key (LED) blinks twice (the red light (LED) underneath the POWER key will blink once then twice).
2
3
4
5
6
Press 9 9 0. The red light will blink twice.
For the first digit of your
For the second digit, press 2 and count all the red blinks. If there are no blinks, the digit is "0".
For the third digit, press 3 and count all the red blinks. If there are no blinks, the digit is "0".
For the fourth digit, press 4 and count
all the red blinks. If there are no blinks, the digit is "0".
Now you have your four-digit code.
WWW.ONEFORALL.COM | 7 |
