One for All URC-2585 Using the AUX Key, Press and hold the Magic key until, Press 9 9 2 TV AUX

Setting Up the BIG EASY

Using the AUX Key

The AUX key on your BIG EASY can be used to control a second Television, Video Recorder or Satellite Receiver.

To set up the AUX key to control a second TV:

1	MAGIC	Press and hold the MAGIC key until
		the red light blinks twice (the light will

blink once then twice).

2	Press 9 9 2 TV AUX.
	TV
	AUX

3

4

5

6

	FOR	ALL
ONE

003180,016,047,093

179,

A-Mark	180	161		052,		003,136
Admiral	055,	030,
Anam National	019,
Anam	003						056
AOC	016 046,186,
ArcherHowell	030,				000,046
&	000
All			000,
	000,

AUX

MAGIC

Find your Television code in the Set-Up Code section (starting on page 19). Codes are listed by brand name. The most popular code is listed first. Make sure your Television is switched on.

Press and release your BIG EASY’s AUX key, then press and hold the MAGIC key until the BIG EASY’s red light blinks twice.

Enter your three-digit TV code using the number keys. The red light will blink twice.

Now, aim your BIG EASY at your Television and press POWER.

If your Television switches off, your BIG EASY is ready to run your Television. When you want to control your second TV, press AUX first.

Important notes:

-To set up your Video Recorder or Satellite, follow the same instructions above, only press the VCR or SAT key during step 2.

-To set up your Cable Box, follow the instructions above only press the SAT key during step 2.

-If your Video’s original remote control does not have a power key, press PLAY instead of POWER when searching for your code.

-If your device does not respond, follow steps 3 - 6 with each code listed for your brand. If none of the codes listed for your brand operate your Television, Video Recorder or Satellite Receiver, then try the search method described on page 14, even if your brand is not listed at all.

6