9
SEARCHING FOR YOUR CODE
Ifyour device does not respond to the remote control after trying all codes
listed for your brand,or ifyour brand is not listed at all,t ry searching for
your code.
NOTE:Before performing a code search for a DVD player or a VCR,turn on the device and
insert the required media.
For example,to search for a code for your TV:
1. On the remote control,press TVonce.
2. Press and hold SETuntil the LED (red light) blinks twice,
then release SET.
3. Enter 9- 9- 1.The LEDwill blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV.Stop when the TV turns off
(after pressing POWER).Ifthe dev ice does not have a Power
key,you can substitute another function,such as digits 0~ 9,
CH▲,or PLAY).
NOTE:In the search mode,the remote control will send IR codes from
its library to the selected device,starting with the most popular code
first.
5. To lock in the code,press and release SET.The LEDwill
blink twice.
6. To search for the codes ofyour other devices,repeat steps
1 through 5,but substitute the appropriate device key for
the device you are searching for.
CHECKING THE CODES
Ifyou have set up the remote control using the Searching For Your Codepro-
cedure as above,you may need to find out which four-digit code is operat-
ing your equipment.For example, to find out which code is operating your
TV:
1. On the remote control,press TVonce.
2. Press and hold SETuntil the LED (red light) blinks twice,
then release SET.
3. Enter 9- 9- 0.The LEDwill blink twice.
4. To view the code for the first digit,press 1once.Wait 3
seconds,count the LED blinks (e.g., three blinks = 3) and
write down the number in the leftmost box in the TV
code boxes on page 8.
NOTE:Ifa code digit is “0”, the LED will not blink.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 9