5
Key Charts
When the LED (red light) blinks,the remote control
is working and (after programming) is sending
signals.
Press DVD/VCR,CBL/SAT,or TVonce to selec t a
desired home entertainment device to control.
Also see the Device Tableon page 6.
Press POWER once to turn on or off t he selected
device.For master power control,see Programming
A Master Power Macroon page 10.
Use the keypad (1~ 9and 0)to directly select
channels (e.g.,009 or 031).
Use TV/VIDto switch the TV’s input to view TV or
video programs.
Press ENTER once after entering the channe l
numbers on some TVs.
Use GUIDEto display your selected device’s
program guide or setup menu.
Press MENU once to display your selected device’s
main menu.
Use INFOto display the current channel and
program or on-screen directory.
Use EXITto exit from your selected device’s guide
or menu.
Use the Cursor Keysto move the cursor in the pro-
gram guide and menu screens.
Use SELECT(OK) to choose options from your
selected device’s menu or guide.
Press LAST once to recall the last channe l.
Use FAVto scan all channels, or after programming,
to scan up to10 favorite channels.
Use CH▲(or CH▼) to select the next higher (or
lower) channel.
Press SUBTITLE/CC once to display (or turn off) sub-
titles or closed captions,if available on your DVD
player or cable/satellite service.
For a PVR (or DVR),press PVR MENUonce to dis-
play a list ofyour recorded shows.
Press MUTE once to turn the sound offor on.
Use VOL▲(or VOL▼) to raise (or lower) the sound
volume.
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 5