One for All URC-7710 Code blink out, Quick Code Reference, Now you have your four-digit code

Code blink out

(To find out which code is currently programmed)

Once you have Set-Up your ONE FOR ALL 1, you can blink back your Set-up Code for future reference.

To blink out your television code:

1.	Press and hold down MAGIC until the ONE FOR ALL
	1 red light blinks twice (the red light will blink once
	then twice).

2.

3.

4.

Press 9 9 0. The red light will blink twice.

For the first digit of your four-digit code, press 1 and count all the red blinks. If there are no blinks, the digit is „0“.

For the second digit of your four-digit code, press 2 and count all the red blinks. If there are no blinks, the digit is „0“.

5.	For the third digit of your four-digit code, press 3
	and count all the red blinks. If there are no blinks,
	the digit is „0“.
6.	For the fourth digit of your four-digit code, press 4
	and count all the red blinks. If there are no blinks,
	the digit is „0“.
	Now you have your four-digit code.

Quick Code Reference

Make sure you write down the code for your television in the boxes below and in the battery compartment for future easy reference.

1 …………………………………… ■ ■ ■ ■

8 WWW.ONEFORALL.COM