Colour and Brightness

Depending on the functions of your original remote control, the ONE FOR ALL 1 may operate the colour and brightness settings of your television.

Colour (+) = Press and release MAGIC then hold Volume (+) Colour (-) = Press and release MAGIC then hold Volume (-)

Brightness (+) = Press and release MAGIC then hold Channel (+) Brightness (-) = Press and release MAGIC then hold Channel (-)

Trouble Shooting

Problem & Solution

Problem:

Solution:

 

 

Your brand is not listed

Try the search method on page 7.

in the code section?

 

 

 

The ONE FOR ALL 1 does

A) Try all the codes listed for

not operate your

your brand.

device(s)?

B) Try the search method on

 

page 7.

 

 

The ONE FOR ALL 1 is not

You may be using the wrong

performing commands

code. Try repeating the Direct

properly?

Set-Up using another code listed

 

under your brand or start the

 

search method over again to

 

locate the proper code.

 

 

Problems changing

Enter the program number

channels?

exactly as you would on your

 

original remote.

 

 

The ONE FOR ALL 1 does

Make sure you are using new

not respond after

batteries and are aiming the ONE

pressing a key?

FOR ALL 1 at your device.

 

 

The red light (LED) does

Replace batteries with 2 fresh,

not blink when you press

new “AA/LR6” alkaline batteries.

a key?

 

 

 

WWW.ONEFORALL.COM

9

Page 9
Image 9
One for All URC-7710 manual Colour and Brightness, Trouble Shooting, Problem & Solution, Problem Solution