Onkyo A-9377 Recording, Adjusting the Bass, Treble, and Balance, Enjoying Audio Sources-Continued

Enjoying Audio Sources—Continued

Adjusting the Bass, Treble, and Balance

BASS TREBLE BALANCE

Recording

Unless you have the full consent of the copyright holder, copyright laws prohibit using your recordings for anything other than personal enjoyment!

REC SELECTOR

Use the BASS control to adjust the bass.

Turn the control clockwise to increase the level of bass sounds; counterclock- wise to decrease the level.

Use theTREBLE control to adjust the treble.

Turn the control clockwise to increase the level of treble sounds; counter- clockwise to decrease the level.

Use the BALANCE control to adjust the left/right balance.

Turn the control clockwise to increase the level of right speaker; counter- clockwise to increase the level of left speaker. Normally, it should be set to the central position.

1	Use the REC SELECTOR to
	select the source you want to
	record.
	LINE: Component connected to the
	LINE jacks.
	PHONO: Turntable connected to the
	PHONO jacks.
	CD: Component connected to the CD
	jacks.
	OFF: Nothing is output by the TAPE
	OUT L/R jacks.
	TUNER: Component connected to the
	TUNER jacks.
	DOCK: Component connected to the
	DOCK jacks.
	SOURCE: Component selected by the
	Input Selector.
2	Prepare the recorder:
	• Set the recorder so that it’s ready for
	recording.
	• If necessary, adjust the recording
	level on the recorder.
	• See the recorder’s instruction manual
	for more information.
3	Start playback on the source
	component.

Notes:

•Signals output by the TAPE OUT L/R jacks are not affected by the A-9377’s Volume, BALANCE, BASS, and TREBLE controls.

•If you’re using an Onkyo cassette deck that’s con-

nected via , for dubbing or synchro recording, set the REC SELECTOR to SOURCE.

17