Connecting the Speaker Cables
Screw-type speaker terminals
Strip 1/2" to 5/8" (12 to 15 mm) of insu- 1/2" to 5/8" (12 to 15 mm) lation from the ends of the speaker
cables, and twist the bare wires tightly, as shown.
(Supplied speaker cables are already stripped.)
Using Banana Plugs
•If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.
•Do not insert the speaker code directly into the center hole of the speaker terminal.
Strip 3/8" to 1/2" (10 to 12 mm) of insulation from the ends of the | 3/8" to 1/2" (10 to 12 mm) | ||||||||||
speaker cables, and twist the bare wires tightly, as shown. |
|
|
|
|
|
|
|
|
|
|
|
(Supplied speaker cables are already stripped.) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
The following illustration shows which speaker should be connected to each pair of terminals.
Surround | Surround |
|
| |
right | left |
|
|
|
speaker | speaker |
|
| |
|
| Center speaker | ||
Gray | Blue | Green | ||
Red |
|
| White | Purple |
Front right | Front left |
| Subwoofer | |
speaker A | speaker A |
|
| |
|
| Speakers A |
| |
Front right | Front left |
speaker B | speaker B |
Speakers B
En
13
