Onkyo AVX-280 Contents, Using the Remote Controller, Installing the Batteries, Introduction

Batteries (AA/R6)

Using the Remote Controller

Installing the Batteries

Note

• If the remote controller

doesn’t work reliably, try replacing the batteries.

• Don’t mix new and old batteries or different

types of batteries.

• If you intend not to use the remote controller for

a long time, remove the batteries to prevent damage from leak- age or corrosion.

•Remove expired batteries as soon as possible to prevent damage from leakage or corrosion.

Aiming the Remote Controller

To use the remote controller, point it at the AV receiver’s remote control sensor, as shown below.

Remote control sensor

AV receiver

Approx. 16 ft. (5 m)

Contents
Introduction
Important Safety Instructions	2
Precautions	3
Speaker Precautions	4
Package Contents	4
Features	6
Front & Rear Panels	7
Speaker Package	9
Remote Controller	10
About Home Theater	11
Connections
Connecting the AV Receiver	12
Turning On & Basic Operations
Turning On/Off the AV Receiver	20
Basic Operations	21
Listening to the Radio	23
Recording	25
Using the Listening Modes	26
Advanced Operations
Advanced Setup	29
Controlling iPod & Other Components
Controlling iPod	38
Controlling Other Onkyo Components	42
Others
Troubleshooting	45
Specifications	49
About HDMI	51
Using an RIHD-compatible TV, Player, or Recorder ...	52

To reset the AV receiver to its factory defaults, turn it on and, while holding down VCR/DVR, press ON/STANDBY (➔ 45).

En

5